Ou Maite Bearing Co., Ltd. Tianjin focus on sales bearing, the company sold part of its wide range of bearing types bearing imports bearing the supermarket _  plummer block housings _ center narrow plummer square bearing seat _ boss round diamond bearing bearing bearing _ triangle hanging bearing _  adjustable diamond bearing slide bearing ring bearing _  suspended bearing Pressed bearing Block _SNL bearing _SONL bearing _SAF bearing _SDAF bearing _SNLN bearing _SBD bearing _FNL bearing _  four-hole bearing bearing bearing distributor in China _DODGE _SKF bearing China's total proxy,

Bearings and bearing assemblies have been successfully used in machinery, plant and other equipment, has withstood the test.

Housings are generally made of gray cast iron. If necessary, it can also provide steel and spheroidal graphite cast iron housings. Because lubricating bearings are usually used after the initial fill lubricating grease can maintain long-term effects, so most bearing without lubrication hole. However, the bearing seat with the logo, if desired or lubrication holes can be drilled. Re-lubrication must ensure that excess grease can overflow

Usually processed into a housing bore bearings which allow the activity, and can be used as non-locating bearings. Locating bearing arrangements can be achieved by embedding the positioning ring, if the table has listed. Locating ring must be specially ordered. No positioning ring housing for non-locating bearing version (L) or a locating bearing version (F) in.

All raw shell and the outer surface of the housing parts are universal coat of paint (color RAL 7031, blue-gray) This paint can be used by all resin, polyurethane, acrylic, epoxy resin, chlorinated rubber, cellulose and acid-hardening hammer gray enamel coated lid. Corrosion protection after processing inner and outer surfaces can be easily removed off.

Depending on the operating conditions, contact seals, non-contact seal, and combinations thereof can all be used to seal the bearing housing, see Chart

INA housing units are available in various designs, such as pillow block, flanged and take-bearing. Ready to install unit includes INA cast iron, or an integrated INA radial insert ball bearings of INA sheet steel housing. To ensure proper function under all operating conditions and operational reliability, bearings and housings are matched with each other.

Since the outer ring of the bearing housing bore spherical outer surface and spherical, INA housing units can compensate for static angular offset axis, see remedy disorders.

The unit is mainly used for locating bearings, but can also be used for non-locating bearing low loads and speeds.

Bearing screw mounted on the adjacent construction. Only need smaller tolerances can screw mounting surface